Incoloy 901 Studs
Incoloy 901 studs is a metal rod or bar with threads on both sides. It also known as double-headed screws or studs, used to connect two parts together. General for mining machinery, bridges, cars, motorcycles, boiler steel structure, hanging tower, large span steel structure and large buildings.
We tend to use studs when the parts need to remove frequently, because the thread will be worn if install and remove often, then we need to change the studs.
This alloy has the following characteristics:
Precipitation hardening, creep heat-resistant steel. The alloy has a high yield strength and a lasting strength below 650 ℃, good oxidation resistance below 760 ℃, long-term stable use. Widely used in the manufacture of 650 ℃ below the work of the aviation and ground gas turbine engine turntable (turbine plate, compressor plate, journal, etc.), static structure, turbine outer ring and fasteners and other parts.
The alloy is widely used in foreign aircraft and ground gas turbine at 650 ℃ below the work of the rotating parts and fasteners, longer service life. China has also been used in the aircraft engine, is the use of proven mature alloy. Alloy forging into, if the process parameters or improper operation, its performance will show a clear direction, and may cause a gap sensitive, but as long as the strict process, it will not appear this phenomenon. The expansion coefficient of the alloy is close to the ferrite type heat-strengthened alloy steel, so that the two materials can be connected to the face of the heat account without special provisions.
Incoloy 901 Chemical composition:
Incoloy 901 Physical properties:
Incoloy 901 minimum mechanical properties in the room temperature:
Yield strength RP0.2N/mm2
Elongation A5 %
If our Incoloy 901 UNS N09901 1.4898 Studs Bolts for Sale caters to your requirement, welcome to contact our professional manufacturers and suppliers. Highly qualified products, competitive price and good after-sale service can be assured.