Austenitic Stainless Steel Stud Bolts

SUS316L SS316L 1.4404 Stud Bolt for Sale

SUS316L SS316L 1.4404 Stud Bolt for Sale
Product Details

SS316L Studs
SS316L Studs is a metal rod or bar with threads on both sides. It also known as double-headed screws or studs, used to connect two parts together. General for mining machinery, bridges, cars, motorcycles, boiler steel structure, hanging tower, large span steel structure and large buildings. 

We tend to use studs when the parts need to remove frequently, because the thread will be worn if install and remove often, then we need to change the studs.
Grade 316L, the low carbon version of 316 and has very high immunity from sensitization (grain boundary carbide precipitation). It is extensivly used in the oil and gas and chemical industries for its cost effective corrosion resistance and ease of fabrication. There is commonly no appreciable price difference between 316 and 316L stainless steel. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.
Compared to chromium-nickel austenitic stainless steels, 316L stainless steel offers higher creep, stress to rupture and tensile strength at elevated temperatures.These alloys may be considered for a wide variety of applications where one or more properties are important.
316L alloy Application areas:
Widely used in pipelines, heat exchangers, food industry, chemical industry, watches and clocks, and other industries.
Typical use
Pulp and paper equipment heat exchangers, dyeing equipment, film washing equipment, pipelines, coastal areas outside the building materials, as well as senior watch bracelet, case and other purposes. Water, equipment, chemicals, dyes, paper, oxalic acid, fertilizer and other production equipment; photography, food industry, coastal areas facilities, ropes, CD rods, bolts, nuts.
SS316L Chemical Composition:

%

Ni

Cr

C

Mn

Si

P

S

Mo

Min

10.0

16.0






2.0

Max

14.0

18.0

0.03

2.0

1.0

0.045

0.03

3.0

Physical properties:

Density

7.98 g/cm3

Melting range

1375~1450℃

316L Mechanical Properties:

Temper

Annealed

Cold worked (approx. 20%)

Material

316

316L


316

316L


Tensile Rm

75

70

ksi (min)

102-131

ksi (min)

Tensile Rm

515

485

MPa (min)

700-900

MPa (min)

R.p. 0.2% Yield

30

27

ksi (min)

73-102

ksi (min)

R.p. 0.2% Yield

205

182

MPa (min)

500-700

MPa (min)

Elongation (2” or 4D gl)

35

% (min)

40

% (min)

SS316L minimum mechanical properties in the room temperature:

Alloy state

Tensile strength Rm N/mm²

Yield strength RP 0. 2N/mm²

Elongation A 5 %

HRC(HBS)

solution

485

170

30

≤187

If our sus316l ss316l 1.4404 stud bolt for sale caters to your requirement, welcome to contact our professional manufacturers and suppliers. Highly qualified products, competitive price and good after-sale service can be assured.

Feedback